home *** CD-ROM | disk | FTP | other *** search
Text File | 1994-06-17 | 95.7 KB | 2,373 lines |
- ==============================================================================
- README.ENG (emTeX DISTRIBUTION) VERSION: 25-Sep-1990
- ==============================================================================
- With modifications of 23-Jun-1992
-
-
- emTeX: TeX for OS/2, PC-DOS and MS-DOS
-
-
- ------------------------------------------------------------------------------
- Preliminary remarks on the documentation
- ------------------------------------------------------------------------------
-
- In order to use TeX or LaTeX, familiarity with the `programming
- language' TeX or LaTeX, respectively, is required. Thus in general
- the reading of [1], [2], [5] or [8] is unavoidable. As a brief
- introduction for beginners the LaTeX brief introduction of H. Partl
- (in German) may be used; it can be found on the disk after the
- installation of emTeX (details below). It cannot be used as a
- substitute for [2] or [5], however. Experience shows that trying to
- save time by not reading the documentation fails. This is especially
- true with TeX.
-
-
- ------------------------------------------------------------------------------
- Book list
- ------------------------------------------------------------------------------
-
- `Original works':
-
- [1] Donald E. Knuth: The TeXbook
-
- The standard work on TeX and plain TeX (in English).
-
- [2] Leslie Lamport: LaTeX: A Document Preparation System
-
- The standard work for LaTeX (in English).
- Supplemented by \emtex\texinput\local.tex and/or \emtex\doc\local.dvi.
-
- [3] Donald E. Knuth: The METAFONTbook
-
- The standard work for METAFONT (in English).
-
- [4] Michael J. Wichura: The PiCTeX Manual
-
- Manual for PiCTeX (in English).
- Obtainable (cost: US$30) from the TeX User's Group:
-
- TeX Users Group
- P. O. Box 9506
- Providence, RI 02940
- USA
-
- Phone: 401-751-7760
- E-mail: tug@math.ams.com
-
-
- Further Books:
-
- [5] Helmut Kopka: LaTeX Eine Einfuehrung
-
- A manual for LaTeX in German. An English version is planned.
-
- [6] Helmut Kopka: LaTeX Erweiterungsmoeglichkeiten
-
- [7] Norbert Schwarz: Eine Einfuehrung in TeX
- [8] Norbert Schwarz: Introduction to TeX
-
-
-
- ------------------------------------------------------------------------------
- Introduction
- ------------------------------------------------------------------------------
-
- emTeX consists among others in the following:
-
- TeX The well-known text system by Donald E. Knuth
- LaTeX The well-known macro package for TeX by L. Lamport
- METAFONT `font compiler' by Donald E. Knuth
- dvidrv Printer driver and Screen Previewer
- TeXcad A program for drawing LaTeX picture environments
-
- All programs but TeXcad can be used under DOS as well as OS/2. TeXcad can
- be used only under DOS or in DOS mode of OS/2.
-
- The dvidrv printer drivers support the following printers:
-
- HP LaserJet+, HP LaserJet II, HP LaserJet III
- HP DeskJet, HP DeskJet+
- Kyocera F-1010
- NEC P6, P7, P2200
- EPSON LQ, FX, and RX series
- Panasonic KX-P1124
- Apple Imagewriter
- C.ITOH 8510A
- Tandy DMP-130
- ...and many more dot matrix printers
-
-
- emTeX consists of several packages. Each single package is provided in the
- form of zip files, which have to be unpacked with the program pkunzip, which
- is also provided. Many packages are spread over several zip files, so that
- DSDD diskettes can be used. (But fonts are available only on HD diskettes.)
- The package DVIDRV, for example, is found in the files dvidrv1.zip,
- dvidrv2.zip, and dvidrv3.zip. On the other hand, the package PICTEX is found
- in the single file pictex.zip.
-
-
- ------------------------------------------------------------------------------
- Diskettes
- ------------------------------------------------------------------------------
-
- On delivery on HD diskettes (1200 KB or 1440 KB), the diskettes contain the
- following files:
-
-
- Diskette 1
- ----------
-
- pkz102.exe Compression program (self-unpacking program).
- pkunzip.exe Unpacking program (from pkz102.exe).
- delete.exe File deleting program.
- remove.exe Package removing program.
- readme.eng This file.
- readme.ger German version of this file.
- help.eng Frequently asked questions with answers (English).
- help.ger Frequently asked questions with answers (German).
- changes.eng Changes from older versions (English).
- changes.ger Changes from older versions (German).
- changes.pre Changes between the pre-releases of emTeX (German).
- tex1.zip TEX package, Part 1/2.
- tex2.zip TEX package, Part 2/2.
-
- Diskette 2
- ----------
-
- latex1.zip LATEX package, Part 1/2.
- latex2.zip LATEX package, Part 2/2.
- latexdoc.zip LATEXDOC package.
- texware.zip TEXWARE package.
- makeindx.zip MAKEINDX package.
- pictex.zip PICTEX package.
- blatex.zip BLATEX package.
-
- Diskette 3
- ----------
-
- dvidrv1.zip DVIDRV package, Part 1/3.
- dvidrv2.zip DVIDRV package, Part 2/3.
- dvidrv3.zip DVIDRV package, Part 3/3.
- texcad.zip TEXCAD package.
- bmf1.zip BMF package, Part 1/2.
-
- Diskette 4
- ----------
-
- mf1.zip MF package, Part 1/3.
- mf2.zip MF package, Part 2/3.
- mf3.zip MF package, Part 3/3.
- mfware1.zip MFWARE package, Part 1/2.
-
- Diskette 5
- ----------
-
- mfware2.zip MFWARE package, Part 2/2.
- pkedit.zip PKEDIT package.
- misc_mf.zip MISC_MF package.
- emsy.zip EMSY package.
- btex1.zip BTEX package, Part 1/2.
- btex2.zip BTEX package, Part 2/2.
- bmf2.zip BMF, Part 2/2.
- bibtex.zip BIBTEX package.
-
- Diskette 6
- ----------
-
- lkurz.zip LKURZ package.
- gtex.zip GTEX package.
- glatex.zip GLATEX package.
- gbtex.zip GBTEX package.
- gblatex.zip GBLATEX package.
- web.zip WEB package.
- dvidrvma.zip DVIDRVMA package.
-
-
- Further diskettes (the files fit on HD diskettes only)
- ------------------------------------------------------
-
- If you don't have these diskettes, you should use MFjob to create the fonts.
-
- Font library files (*.fli):
-
- Name | Resolution| Diskettes | Printers
- | (DPI) | / Files | (among others)
- -----+-----------+-----------+-------------------------------------------
- LJ | 300 | 5 / 8 | HP LaserJet+, DeskJet, Kyocera F-1010
- P6L | 180 | 3 / 7 | NEC P6, EPSON LQ series, Panasonic KX P1124
- P6M | 360x180 | 4 / 7 | NEC P6, EPSON LQ series, Panasonic KX P1124
- P6H | 360 | 6 / 8 | NEC P6, Panasonic KX P1124, EPSON LQ-550
- FX | 240x216 | 4 / 7 | EPSON FX-80, Tandy DMP-130
- ITO | 160x144 | 3 / 7 | C.ITOH 8510A, Apple Imagewriter
-
-
- ------------------------------------------------------------------------------
- Packages
- ------------------------------------------------------------------------------
-
- The size indications for the packages are given in KBytes (1024 bytes).
- If the cluster size of the disk is greater than 1 KByte, which is almost
- always the case, somewhat more space will be needed.
-
-
- BIBTEX
- contains: BibTeX (Bibliography database for LaTeX)
- requires: LATEX
- optional: ---
- files: 11
- size: 323
-
- BLATEX
- contains: LaTeX for bigTeX (extra big LaTeX)
- requires: TEX, BTEX, LATEX
- optional: ---
- files: 7
- size: 499
-
- BMF
- contains: bigMETAFONT (extra big METAFONT)
- requires: MF
- optional: ---
- files: 11
- size: 1043
-
-
- BTEX
- contains: bigTeX (extra big TeX)
- requires: TEX
- optional: BLATEX
- files: 9
- size: 986
-
- DVIDRV
- contains: Printer drivers and previewers (dvidrv)
- requires: ---
- optional: TEX
- files: 106
- size: 1491
-
-
- DVIDRVMA
- contains: Manual for the dvidrv drivers
- requires: DVIDRV, (EMSY)
- optional: ---
- files: 29
- size: 511
-
-
- EMSY *)
- contains: Special fonts of/for em
- requires: MF, TEX
- optional: LATEX
- files: 19
- size: 25
-
- GBLATEX
- contains: LaTeX for bigTeX (German hyphenation patterns)
- requires: TEX, BTEX, GTEX, LATEX, BLATEX, GLATEX
- optional: ---
- files: 7
- size: 499
-
- GBTEX
- contains: bigTeX (German hyphenation patterns)
- requires: TEX, BTEX, GTEX
- optional: GBLATEX
- files: 5
- size: 316
-
- GLATEX
- contains: LaTeX (German hyphenation) and brief LaTeX intro.
- requires: LATEX, GTEX
- optional: ---
- files: 8
- size: 415
-
- GTEX
- contains: Files for typesetting German texts
- requires: TEX
- optional: GLATEX
- files: 12
- size: 312
-
- LATEX
- contains: LaTeX (to be more exact: ILaTeX)
- requires: TEX
- optional: DVIDRV
- files: 78
- size: 1141
-
- LATEXDOC *)
- contains: doc files (documented sty files; obsolete)
- requires: LATEX
- optional: ---
- files: 26
- size: 329
-
- LKURZ *)
-
- contains: Source text for the brief LaTeX intro (German)
- requires: LATEX
- optional: ---
- files: 7
- size: 94
-
- MAKEINDX
-
- contains: MakeIndex (to sort LaTeX index)
- requires: LATEX
- optional: ---
- files: 5
- size: 156
-
- MF
- contains: METAFONT
- requires: MFWARE
- optional: ---
- files: 191
- size: 1868
-
- MFWARE
- contains: Auxiliary programs for METAFONT
- requires: MF
- optional: TEX, PKEDIT
- files: 44
- size: 759
-
- MISC_MF *)
- contains: Various font source texts
- requires: METAFONT
- optional: ---
- files: 5
- size: 134
-
- PICTEX
- contains: PiCTeX (graphic macros for TeX)
- requires: TEX
- optional: BLATEX (required for LaTeX)
- files: 5
- size: 147
-
- PKEDIT
- contains: Font editor
- requires: ---
- optional: MFWARE
- files: 4
- size: 100
-
- TEX
- contains: emTeX (plain TeX)
- requires: ---
- optional: DVIDRV
- files: 104
- size: 1110
-
- TEXCAD
- contains: TeXcad (drawing program for LaTeX picture environment)
- requires: ---
- optional: ---
- files: 18
- size: 244
-
- TEXWARE
- contains: Auxiliary programs for TeX
- requires: TEX
- optional: ---
- files: 11
- size: 439
-
- WEB *)
- contains: The WEB programming system (TANGLE, WEAVE, ...)
- requires: TEX
- optional: ---
- files: 7
- size: 255
-
-
- The packages with *) are usually not installed.
-
-
- ------------------------------------------------------------------------------
- Directions for pkunzip
- ------------------------------------------------------------------------------
-
- The program pkunzip is part of a program package from PKWARE. It is
- installed as follows on a disk (for example in the directory c:\pk):
-
- md c:\pk
- a:pkz102 c:\pk
-
- These lines mean the following:
-
- md c:\pk Make the directory
- a:pkz102 Load the self-unpacking program on drive a:
- c:\pk Target directory
-
- Please observe the license conditions at the end of manual.doc
- (contained in pkz102.exe)!
-
- The contents of a zip file (here dvidrvma.zip) can be displayed as follows:
-
- pkunzip -vb a:dvidrvma
-
- These lines have the following meaning:
-
- pkunzip Call the unpacking program
- -vb List the contents of a zip file (brief listing)
- a:dvidrvma zip file
-
-
- ------------------------------------------------------------------------------
- Installation
- ------------------------------------------------------------------------------
-
- First read this file (readme.eng) in its entirety. Then you should read the
- license conditions at the end of manual.doc (contained in pkz102.exe) for
- pkzip/pkunzip. (And follow the conditions.)
-
- For the installation, the program pkunzip.exe should be copied onto the disk.
- A directory should be used that is in the path for executables (PATH). For
- OS/2 users: There is also an OS/2 version of pkzip/pkunzip, but this is not
- supplied with emTeX. If you do not have this, you have to use pkunzip in
- the DOS compatibility environment.
-
- All of the following examples assume that emTeX is to be installed on drive c:
- (You can however install emTeX on another disk, if there is enough space.)
- In case an older version of emTeX is already installed on the disk, this
- should first be removed. First the files you have modified should be saved
- (usually only batch and configuration files). Moreover, before removing emTeX
- from the disk, the diskettes should be checked for readability, for example
- with
-
- pkunzip -t a:*
-
- These lines have the following meaning:
-
- pkunzip Call the unpacking program
- -t Check the zip files
- a:* All the zip files on drive a:
-
- The removal of emTeX is done with the program delete, which is supplied on the
- first diskette. This is done as follows (drive c:):
-
- a:delete -sd c:\emtex\*.*
-
- These lines have the following meaning:
-
- a: Load the program from diskette (first diskette!)
- delete Call the file deletion program
- -s Also delete in subdirectories
- -d Remove directories
- c:\emtex\*.* Files to be removed
-
- Since by this procedure all files in the directory \emtex and in all
- subdirectories of this directory will be deleted, you should not use this
- directory for your own files!
-
- Now the individual packages can be installed. The following packages are
- usually installed (the packages in parentheses do not have to be installed):
-
- TeX: TEX, DVIDRV, (PICTEX), (TEXWARE)
- LaTeX: TEX, DVIDRV, LATEX, (BIBTEX), (TEXWARE), (MAKEINDX)
- METAFONT: MF, MFWARE, (PKEDIT), (TEX)
-
- For example, to install the package LATEX from drive a: onto disk c:, the
- following should be entered:
-
- pkunzip -d -o a:latex? c:\
-
- This line means the following:
-
- pkunzip Call the unpacking program
- -d Use directories stored in zip file
- -o Overwrite existing files
- a:latex? Unpack the package LATEX (latex1.zip, ...)
- c:\ Target path
-
- In this way the files will automatically be copied into the right
- directories. After installation you should read (or print and read) the
- following files:
-
- \emtex\doc\english\texware.doc (TEX package, English)
- \emtex\doc\german\texware.doc (TEX package, German)
- \emtex\doc\english\dvidrv.doc (DVIDRV package, English)
- \emtex\doc\german\dvidrv.doc (DVIDRV package; do not print out; see below!)
-
- Moreover, the license conditions in the following files should be observed:
-
- \emtex\doc\makeindx.cpy (MAKEINDX package)
- \emtex\texinput\ghyphen.min (GTEX package)
- \emtex\texinput\ghyphen.max (GTEX package)
-
- If you have installed the package DVIDRV and have followed the directions in
- the part `Installation of the printer driver and screen previewer' of this
- file, then you should install the package DVIDRVMA. This enables you to print
- out the `real' manual for the package DVIDRV (as opposed to dvidrv.doc), if
- you have available a suitable printer. After printing the manual you can
- again delete the files taken from DVIDRVMA (see below). If you cannot, or do
- not want to, print the dvidrv manual, then you have to content yourself with
- the indications in dvidrv.doc.
-
- After the installation of DVIDRV you can print out the other instructions (or
- look at them on the screen). Reading
-
- \emtex\doc\english\emtex.dvi (TEX package)
- \emtex\doc\local.dvi (LATEX package)
-
- is especially recommended.
-
- In order to use TeX or METAFONT, various environment variables still have to
- be set; see the section `Environment Variables' further below in this file.
-
- If you want to use LaTeX together with PiCTeX, then bigTeX has to be used.
- This is a bigger (but slower) version of emTeX. At present only a preliminary
- version is available.
-
- A brief introduction to LaTeX, in German, is found in the package GLATEX.
- Among the files delivered is the macro package german.sty of H. Partl; if you
- want to typeset German or other non-English texts with TeX or LaTeX, you
- should read the corresponding instruction \emtex\doc\germdoc.dvi.
-
- Since there are some files which you will not need, you should write a
- batch file to delete the ones not needed. In this way you can save some
- work in the next installation of emTeX. For example, if you work under
- DOS, you will not need the OS/2 versions of TeX and METAFONT. It is also
- possible to extract single files from a zip file; see manual.doc in
- pkz102.exe. Example:
-
- pkunzip -d a:pkedit c:\ emtex\pkedit.exe
-
- This line means the following:
-
- pkunzip Call the unpacking program
- -d Use directories stored in zip file
- a:pkedit Unpack the package PKEDIT
- c:\ Target path
- emtex\pkedit.exe File name (without leading backslash!)
-
-
- You'll find some frequently asked questions with answers in the file
- help.eng (and help.ger) on the first diskette. Before asking the author,
- you should read help.eng.
-
-
- ------------------------------------------------------------------------------
- Removing a package
- ------------------------------------------------------------------------------
-
- You can remove a package from the hard disk if the appropriate REM file is
- supplied - these files will appear in emTeX sets made available after 2nd
- May 1990. To remove a package the program `remove', on the first disk, is
- needed. If, for example, you want to remove the DVIDRVMA package from the C:
- drive you would enter the following commands:
-
- a:remove c:\emtex\remove\dvidrvma.rem c:\
-
- where
-
- a: load the program from the first disk
- remove run the package removal program
- c:\emtex\remove\dvidrvma.rem
- the list of files comprising the package
- c:\ remove the package from this disk
-
-
-
- ------------------------------------------------------------------------------
- Directories
- ------------------------------------------------------------------------------
-
- The following directories are created during the installation (see also
- emtex.dvi, local.dvi, texware.doc, and mfware.doc):
-
- \emtex
-
- Programs, batch files, and configuration files.
-
- \emtex\doc
-
- Instructions and Manuals. The texts in this directory are
- available in only one language (English or German).
-
- \emtex\doc\english
-
- English Instructions and Manuals.
-
- \emtex\doc\german
-
- German Instructions and Manuals.
-
- \emtex\doc\gr180
-
- Graphic files for the dvidrv manual (180 DPI).
-
- \emtex\doc\gr300
-
- Graphic files for the dvidrv manual (300 DPI).
-
- \emtex\doc\gr360
-
- Graphic files for the dvidrv manual (360 DPI).
-
- \emtex\texfmts
-
- TeX format files (macro packages in a fast-loading format; for
- example, plain and LaTeX) and tex.poo.
-
- \emtex\btexfmts
-
- bigTeX format files (macro packages in a fast-loading format; for
- example, plain and LaTeX) and tex.poo.
-
- \emtex\tfm
-
- tfm files (TeX font metrics; font descriptions).
-
- \emtex\texinput
-
- Texts which will be read by TeX (and BibTeX).
-
- \emtex\bibinput
-
- Bibliography database for BibTeX.
-
- \emtex\mfinput
-
- Texts which will be read by METAFONT (and MFT).
-
- \emtex\mfbases
-
- METAFONT base files (macro packages in a fast-loading format; for
- example plain and cm) and mf.poo.
-
- \emtex\bmfbases
-
- bigMETAFONT base files (macro packages in a fast-loading format;
- for example plain and cm) and mf.poo.
-
- \emtex\mfjob
-
- mfj files (see MFjob).
-
- \emtex\remove
-
- Package contents listings used by the remove program.
-
-
- ------------------------------------------------------------------------------
- Environment variables and config.sys
- ------------------------------------------------------------------------------
-
- In this section it is assumed that TeX has been installed on drive C:.
-
- You should set the environment variables for TeX as follows:
-
- set texinput=c:\emtex\texinput
- set tfm=c:\emtex\tfm
- set texfmt=c:\emtex\texfmts
- set btexfmt=c:\emtex\btexfmts (only for bigTeX)
- set textfm=c:\emtex\tfm
- set bibinput=c:\emtex\bibinput
-
- The environment variables for METAFONT and MFjob are set as follows:
-
- set mfinput=c:\emtex\mfinput
- set mfbas=c:\emtex\mfbases
- set bmfbas=c:\emtex\bmfbases (only for bigMETAFONT)
- set mfjob=c:\emtex\mfjob
-
- In addition, the directory c:\emtex should be put in the search path, for
- example:
-
- path c:\bin;c:\emtex
-
- All of these lines should be put in the file autoexec.bat (file config.sys
- for OS/2). The file \emtex\set-tex.bat (\emtex\set-tex.cmd in OS/2) can be
- used as a model, or modified and called by autoexec.bat. If the computer
- complains about not enough environment space, you should consult your DOS
- manual concerning the SHELL command in the config.sys file and concerning
- the /E and /P options of the program COMMAND.COM.
-
- If you put all emTeX directories on ONE drive and if the directories are
- organzied as recommended (and as stored in the zip files), it will be
- sufficient to set the environment variable EMTEXDRV (besides PATH):
- set emtexdrv=c
- This causes all programs (but dvidrv) to use the default directories on
- drive C:.
-
- The config.sys file should specify at least
-
- FILES=20
- BUFFERS=20
-
- greater values are allowed.
-
- Under OS/2, the line
-
- IOPL=YES
-
- is required in config.sys for dviscr and pkedit.
-
-
- ------------------------------------------------------------------------------
- Installation of the printer drivers and the screen previewers
- ------------------------------------------------------------------------------
-
- 1. Install the DVIDRV package.
-
- 2. Copy the fonts to the disk. For example, to install them on drive d: do
- as follows:
-
- md d:\texfonts
- copy a:*.fli d:\texfonts
-
- The last line has to be repeated for all suitable font diskettes. The
- fonts should if possible not be put into a directory under \emtex, in
- order to simplify the installation of a new version of emTeX (that is,
- without having to copy the fonts again to the disk).
-
- 3. The following environment variables should be set:
-
- dvidrvinput Search path for dvi files.
- dvidrvfonts Search path for fli files.
- dvidrvgraph Search path for graphic files.
-
- For example, this can be done by
-
- set dvidrvinput=c:\mytex;c:\emtex\doc
- set dvidrvfonts=d:\texfonts
- set dvidrvgraph=c:\mytex;c:\emtex\doc\gr$r
-
- The directory c:\emtex\doc resp. c:\emtex\doc\gr$r is used for printing
- the dvidrv manual.
- The value stored in DVIDRVFONTS will have the following appended to it by
- prtp6l.bat, for example ($r will be replaced by the resolution):
-
- \pixel.p6l\$rdpi
-
- Therefore only a directory should be given, and this must not end with
- a \.
- All these lines should be put in the file autoexec.bat (for OS/2
- config.sys). \emtex\set-tex.bat or \emtex\set-tex.cmd can be used as
- models, or modified and called by autoexec.bat. Important: $r and $s
- must be written in small letters.
- If you don't want to set the environment variables (or if you cannot),
- you have to insert the desired directories into the configuration
- files (*.cnf) after renaming.
-
- 4. To use dviscr under OS/2, you should insert the line
-
- IOPL=YES
-
- into config.sys. If you don't need the OS/2 spooler, you should
- disable it.
-
- 4. Now the following batch files can be used:
-
- v Screen previewer (dviscr).
- vs Screen previewer (dviscrs).
- prthplj Printer driver (dvihplj: HP LaserJet+).
- prthplj /od Printer driver (dvihplj: HP DeskJet).
- prthplj /ok Printer driver (dvihplj: Kyocera F-1010).
- prtp6l Printer driver (dvidot p6l: P6 with 180 DPI).
- prtp6m Printer driver (dvidot p6m: P6 with 360x180 DPI).
- prtp6h Printer driver (dvidot p6h: P6 with 360 DPI).
- prtfx Printer driver (dvidot fx: EPSON FX-80).
- prtlql Printer driver (dvidot lql: EPSON LQ, 180 DPI).
- prtlqm Printer driver (dvidot lqm: EPSON LQ, 360x180 DPI).
- prtlqh Printer driver (dvidot lqh: EPSON LQ, 360 DPI).
- Note: not all LQ printers support 360 DPI.
- prtitoh Printer driver (dvidot itoh: C.ITOH 8510A).
- prtaiw Printer driver (dvidot aiw: Apple Imagewriter).
- msplj Create graphic files (Parameters: lj.cnf)
- mspp6l Create graphic files (Parameters: p6l.cnf)
- mspp6m Create graphic files (Parameters: p6m.cnf)
- mspp6h Create graphic files (Parameters: p6h.cnf)
- mspfx Create graphic files (Parameters: fx.cnf)
- mspito Create graphic files (Parameters: ito.cnf)
-
- If you have a version of DOS prior to 3.3, then you should change the
- first line of these batch files from
-
- @echo off
-
- to
-
- echo off
-
- The batch files v.cmd, v.bat and vs.bat use the configuration file
- lj.cnf (LJ fonts). If another configuration file is to be used, then
- these batch files have to be changed correspondingly. If you don't have
- the correct font files for your printer, the drivers can reduce the
- existing font files in certain cases (marked with * in the table below;
- loss of quality!). Gray mode is recommended for dviscr. Example:
- Use
-
- @p6m.cnf /ox2
-
- instead of
-
- @p6l_p6m.cnf
-
- with dviscr. This is the table of configuration files:
-
- File name | Resolution | Fonts | Font resolution
- -------------+------------+---------+-----------------
- lj.cnf | 300 | LJ | 300
- p6l.cnf | 180 | P6L | 180
- p6l_p6m.cnf *| 180 | P6M | 360x180
- p6l_p6h.cnf *| 180 | P6H | 360
- p6m.cnf | 360x180 | P6M | 360x180
- p6m_p6h.cnf *| 360x180 | P6H | 360
- p6h.cnf | 360 | P6H | 360
- fx.cnf | 240x216 | FX | 240x216
- ito.cnf | 160x144 | ITO | 160x144
-
- 6. Justify the margins. This procedure is described in dvidrv.doc under /la#.
- The /la# and /ta# options should be put in the respective prt*.cmd/bat
- files.
-
- 7. If you're using a NEC P7, EPSON FX-100 or another wide (13.6") printer,
- you have to modify the batch files prt*.cmd resp. prt*.bat. Examples:
- prtfx.bat/cmd:
-
- old: dvidot fx80 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
- new: dvidot fx100 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
-
- prtlql.bat/cmd:
-
- old: dvidot lql @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
- new: dvidot lqwl @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
-
- prtp6h.bat/cmd:
-
- old: dvidot p6h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
- new: dvidot p7h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
-
- 8. Print the dvidrv manual (German): Install the DVIDRVMA package and follow
- the instructions in dvidrvma.doc.
-
- 9. If you need (and have) the big fonts for SliTeX, you have to change the
- configuration file(s) to include the extra font library file.
- Example (lj.cnf):
-
- old: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b
- new: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b;lj_sli
-
-
- ------------------------------------------------------------------------------
- Further sources of information
- ------------------------------------------------------------------------------
-
- The following files contain further information (dvi files can be looked at on
- the screen with a screen previewer, or printed with a printer driver):
-
- \emtex\doc\english\texware.doc (TEX package, English)
- \emtex\doc\german\texware.doc (TEX package, German)
-
- Calling TeX and its associated programs.
-
- \emtex\doc\germdoc.dvi (GTEX package, German, 4 pages)
-
- Instructions for german.sty.
-
- \emtex\doc\english\emtex.dvi (TEX package, English, 8 pages)
- \emtex\doc\german\emtex.dvi (TEX package, German, 12 pages)
-
- Instructions for emTeX.
-
- \emtex\doc\latex.bug (LATEX package, English)
-
- Changes and known mistakes in LaTeX.
-
- \emtex\doc\local.gid (LATEX package, English)
-
- Ultra brief instructions for LaTeX.
-
- \emtex\doc\local.dvi (LATEX package, English, 20 pages)
-
- Implementation specific instructions for LaTeX.
-
- \emtex\doc\lkurz.dvi (GLATEX package, German, 46 pages)
-
- Brief instructions for LaTeX by H.Partl.
-
- \emtex\doc\english\mfware.doc (MF package, English)
- \emtex\doc\german\mfware.doc (MF package, German)
-
- Calling METAFONT and its associated programs.
-
- \emtex\doc\english\mfjob.doc (MFWARE package, English)
- \emtex\doc\german\mfjob.doc (MFWARE package, German)
-
- Instructions for the MFjob program.
-
- \emtex\doc\english\dvidrvma.doc (DVIDRVMA package, English)
- \emtex\doc\german\dvidrvma.doc (DVIDRVMA package, German)
-
- Instructions for printing the dvidrv manual.
-
- \emtex\doc\english\dvidrv.dvi (DVIDRVMA package, English, 45 pp.)
- \emtex\doc\german\dvidrv.dvi (DVIDRVMA package, German, 58 pages)
-
- Manual for the dvidrv drivers.
-
- \emtex\doc\english\dvidrv.doc (DVIDRV package, English)
- \emtex\doc\german\dvidrv.doc (DVIDRV package, German)
-
- Instructions for the dvidrv drivers. Pay special attention to
- the end (changes with respect to earlier versions).
-
- \emtex\doc\english\fontlib.doc (DVIDRV package, English)
- \emtex\doc\german\fontlib.doc (DVIDRV package, German)
-
- Instructions for the fontlib program.
-
- \emtex\doc\english\makedot.doc (DVIDRV package, English)
- \emtex\doc\german\makedot.doc (DVIDRV package, German)
-
- Provisional instructions for makedot. This is a supplement to
- dvidot.doc.
-
- \emtex\doc\web.doc (WEB package, German)
-
- Calling the programs of the WEB system.
-
- \emtex\doc\english\pkedit.doc (PKEDIT package, English)
- \emtex\doc\german\pkedit.doc (PKEDIT package, German)
-
- Instructions for the pkedit program.
-
- \emtex\doc\english\tcman.dvi (TEXCAD package, English, 13 pages)
- \emtex\doc\german\tcman.dvi (TEXCAD package, German, 14 pages)
-
- The TeXcad manual.
-
- \emtex\texinput\webman.tex (WEB package, English)
-
- Manual for the WEB system.
-
- \emtex\texinput\makeindx.tex (MAKEINDX package, English)
-
- Instructions for MakeIndex.
-
- \emtex\doc\makeindx.doc (MAKEINDX package, English)
-
- Detailed instructions for MakeIndex.
-
- \emtex\doc\english\texchk.doc (TEXWARE package, English)
- \emtex\doc\german\texchk.doc (TEXWARE package, German)
-
- Instructions for texchk.
-
-
- ------------------------------------------------------------------------------
- File names in the emTeX system
- ------------------------------------------------------------------------------
-
- .aux Auxiliary file created and used by LaTeX
- .bak Backup file (fontlib, pkedit)
- .bas Fast-loading file for METAFONT (no, not BASIC)
- .bat Batch file (DOS)
- .bbl Output file of BibTeX
- .bgi Video graphics driver (used by TeXcad)
- .bib Bibliography database for BibTeX
- .blg Transcript file (BibTeX)
- .bst Bibliography style for BibTeX
- .bug List of bugs
- .ch Change file (TANGLE, WEAVE and MFT)
- .chr Readable form of a pxl file (PXtoCH and CHtoPX)
- .cmd Batch file (OS/2)
- .cnf Configuration file for dvidrv
- .dlg Transcript file (dvidrv)
- .doc Instructions (straight text) or commented sty file
- .dot Parameter file for dvidot
- .dvi Device independent output of TeX
- .err Error messages and warnings (dvidrv)
- .exe Executable program
- .fli Font library file (dvidrv)
- .fmt Fast-loading file for TeX
- .gf Font file created by METAFONT (usually .#gf)
- .gft Default extension for the output of GFtype
- .glo LaTeX auxiliary file for \glossary
- .hlp On-line help
- .idx Index entries (created by LaTeX)
- .ilg MakeIndex transcript file
- .ind Index entries (created by MakeIndex)
- .lof LaTeX auxiliary file for \listoffigures
- .log Transcript file (TeX and METAFONT)
- .lot LaTeX auxiliary file for \listoftables
- .mac TeXcad macro file
- .mf Source text for a font
- .mfj Job file for MFjob
- .mft Style file for MFT
- .msp Graphic file
- .opt TeXcad parameters
- .ovl Overlay
- .pas Pascal source file (TANGLE)
- .pcx Graphic file
- .pic Picture environment created by TeXcad
- .pk Compressed font file
- .pkt Default extension for the output of PKtype
- .pl Readable form of a tfm file
- .poo String pool for INITEX or INIMF (pool file)
- .pxl Font file
- .rem Package contents listing for the remove program
- .sty Document style or document style option for LaTeX
- .sub Font substitution file (dvidrv)
- .tcp TeX code page (translation of code pages and special characters)
- .tex TeX text
- .tfm Symbol widths and other properties of a font (font metrics)
- .toc Notes of LaTeX for contents
- .ver List of program versions (TeXcad)
- .vf Virtual font (dvidrv, VFtoVP, VPtoVF)
- .vpl Readable form of a vf file (VFtoVP and VPtoVF)
- .web WEB source text (TANGLE and WEAVE)
- .zip Archive file (collection of compressed files)
-
- (No claim as to completeness.)
-
-
- ------------------------------------------------------------------------------
- File list
- ------------------------------------------------------------------------------
-
- The abbreviation CM stands for Computer Modern. A `*' at the beginning of a
- line denotes a change from the emTeX distribution of 29-Mar-1990, and a '+'
- marks a newly added file.
-
-
- BIBTEX package
- --------------
-
- * \emtex\bibtex.exe BibTeX
-
- \emtex\bibinput\btxdoc.bib Bibliography database for btxdoc.tex
- \emtex\bibinput\xampl.bib Database of examples
-
- \emtex\texinput\abbrv.bst Bibliography style `abbrv'
- \emtex\texinput\alpha.bst Bibliography style `alpha'
- \emtex\texinput\plain.bst Bibliography style `plain'
- \emtex\texinput\unsrt.bst Bibliography style `unsrt'
- \emtex\texinput\btxbst.doc Source file for plain Bibliography Styles
- \emtex\texinput\btxdoc.tex Instructions for BibTeX
- \emtex\texinput\btxhak.tex Instructions: creating Bibliography Styles
-
- + \emtex\remove\bibtex.rem Package contents listing for `remove'
-
-
- BLATEX package
- --------------
-
- \emtex\blatex.bat Calling LaTeX (American hyphenation)
- \emtex\blatex.cmd Calling LaTeX (American hyphenation)
-
- * \emtex\btexfmts\lplain.fmt fmt file for LaTeX (Amer. hyphenation)
- * \emtex\btexfmts\lplain.log log file of lplain.fmt
- + \emtex\btexfmts\slifmt.cmd Create fmt file for SliTeX
- + \emtex\btexfmts\slifmt.bat Create fmt file for SliTeX
-
- + \emtex\remove\blatex.rem Package contents listing for `remove'
-
-
- BMF package
- -----------
-
- * \emtex\bmf.exe BigMETAFONT (DOS)
- * \emtex\bmf286.exe BigMETAFONT (DOS, 80286 CPU)
- * \emtex\bmfp.exe BigMETAFONT (OS/2 protected mode)
-
- \emtex\bmfbases\bas.bat Create bas files
- \emtex\bmfbases\bas.cmd Create bas files
- * \emtex\bmfbases\cm.bas Computer Modern METAFONT base
- * \emtex\bmfbases\cm.log log file to cm.bas
- * \emtex\bmfbases\mf.poo Pool file (string list) for INIMF
- * \emtex\bmfbases\plain.bas plain METAFONT base
- * \emtex\bmfbases\plain.log log file of plain.bas
-
- + \emtex\remove\bmf.rem Package contents listing for `remove'
-
-
- BTEX package
- ------------
-
- * \emtex\btex.exe BigTeX (DOS)
- * \emtex\btex286.exe BigTeX (DOS, 80286 CPU)
- * \emtex\btexp.exe BigTeX (OS/2 protected mode)
-
- * \emtex\btexfmts\fmt.bat Create fmt files
- * \emtex\btexfmts\fmt.cmd Create fmt files
- * \emtex\btexfmts\plain.fmt plain TeX (American hyphenation)
- * \emtex\btexfmts\plain.log log file of plain.fmt
- * \emtex\btexfmts\tex.poo Pool file (string list) for INITeX
-
- + \emtex\remove\btex.rem Package contents listing for `remove'
-
-
- DVIDRV package
- --------------
-
- + \emtex\doc\english\dvidrv.doc Instructions for dvidrv (English)
- * \emtex\doc\german\dvidrv.doc Instructions for dvidrv (German)
- + \emtex\doc\english\pcltomsp.doc Instructions for PCLtoMSP (English)
- * \emtex\doc\german\pcltomsp.doc Instructions for PCLtoMSP (German)
- + \emtex\doc\english\makedot.doc Instructions for makedot (English)
- + \emtex\doc\german\makedot.doc Instructions for makedot (German)
- + \emtex\doc\english\fontlib.doc Instructions for fontlib (English)
- * \emtex\doc\german\fontlib.doc Instructions for fontlib (German)
- \emtex\doc\adjust.dvi dvi file for adjusting margins
-
- + \emtex\dvidrv.err Error messages and warnings
- * \emtex\dviscr.exe Screen previewer
- * \emtex\dviscrs.exe Screen previewer (DOS and small memory)
- * \emtex\dvihplj.exe Driver for HP LaserJet+
- + \emtex\dvidot.exe Generic dot-matrix printer driver
- * \emtex\dvimsp.exe Create graphic files from dvi files
- * \emtex\dvivik.exe Screen Previewer for Viking I
- + \emtex\makedot.exe Convert dvidot parameter files
- \emtex\fontlib.exe Create and maintain font library files
- * \emtex\pcltomsp.exe Convert pcl files to graphic files
- + \emtex\fx80.dot Parameter file for EPSON FX-80
- + \emtex\fx100.dot Parameter file for EPSON FX-100
- + \emtex\aiw.dot Parameter file for Apple Imagewriter
- + \emtex\itoh.dot Parameter file for C.ITOH 8510A
- + \emtex\p6l.dot Parameter file for NEC P6 (180 DPI)
- + \emtex\p6m.dot Parameter file for NEC P6 (360x180 DPI)
- + \emtex\p6h.dot Parameter file for NEC P6 (360 DPI)
- + \emtex\p7l.dot Parameter file for NEC P7 (180 DPI)
- + \emtex\p7m.dot Parameter file for NEC P7 (360x180 DPI)
- + \emtex\p7h.dot Parameter file for NEC P7 (360 DPI)
- + \emtex\lql.dot Parameter file for EPSON LQ (180 DPI)
- + \emtex\lqm.dot Parameter file for EPSON LQ (360x180 DPI)
- + \emtex\lqh.dot Parameter file for EPSON LQ (360 DPI)
- + \emtex\lqwl.dot Parameter file for EPSON LQ (180 DPI)
- + \emtex\lqwm.dot Parameter file for EPSON LQ (360x180 DPI)
- + \emtex\lqwh.dot Parameter file for EPSON LQ (360 DPI)
- + \emtex\dmp130.dot Parameter file for Tandy DMP-130
- + \emtex\ibm4201.dot Parameter file for IBM 4201 (240x216 DPI)
- + \emtex\ibm4202.dot Parameter file for IBM 4202 (240x216 DPI)
- + \emtex\ibm4207l.dot Parameter file for IBM 4207 (180 DPI)
- + \emtex\ibm4207m.dot Parameter file for IBM 4207 (360x180 DPI)
- + \emtex\ibm4208l.dot Parameter file for IBM 4208 (180 DPI)
- + \emtex\ibm4208m.dot Parameter file for IBM 4208 (360x180 DPI)
- * \emtex\v.cmd Call for dviscr
- * \emtex\v.bat Call for dviscr
- * \emtex\vs.bat Call for dviscrs
- * \emtex\prtfx.cmd Call for dvidot fx80
- * \emtex\prtfx.bat Call for dvidot fx80
- * \emtex\prthplj.cmd Call for dvihplj
- * \emtex\prthplj.bat Call for dvihplj
- * \emtex\prtp6l.cmd Call for dvidot p6l
- * \emtex\prtp6l.bat Call for dvidot p6l
- * \emtex\prtp6m.cmd Call for dvidot p6m
- * \emtex\prtp6m.bat Call for dvidot p6m
- * \emtex\prtp6h.cmd Call for dvidot p6h
- * \emtex\prtp6h.bat Call for dvidot p6h
- + \emtex\prtlql.cmd Call for dvidot lql
- + \emtex\prtlql.bat Call for dvidot lql
- + \emtex\prtlqm.cmd Call for dvidot lqm
- + \emtex\prtlqm.bat Call for dvidot lqm
- + \emtex\prtlqh.cmd Call for dvidot lqh
- + \emtex\prtlqh.bat Call for dvidot lqh
- * \emtex\prtitoh.cmd Call for dvidot itoh
- * \emtex\prtitoh.bat Call for dvidot itoh
- * \emtex\prtaiw.cmd Call for dvidot aiw
- * \emtex\prtaiw.bat Call for dvidot aiw
- * \emtex\mspfx.bat Call for dvimsp.exe (with fx.cnf)
- * \emtex\mspfx.cmd Call for dvimsp.exe (with fx.cnf)
- * \emtex\msplj.bat Call for dvimsp.exe (with lj.cnf)
- * \emtex\msplj.cmd Call for dvimsp.exe (with lj.cnf)
- \emtex\mspp6l.bat Call for dvimsp.exe (with p6l.cnf)
- \emtex\mspp6l.cmd Call for dvimsp.exe (with p6l.cnf)
- \emtex\mspp6m.bat Call for dvimsp.exe (with p6m.cnf)
- \emtex\mspp6m.cmd Call for dvimsp.exe (with p6m.cnf)
- \emtex\mspp6h.bat Call for dvimsp.exe (with p6h.cnf)
- \emtex\mspp6h.cmd Call for dvimsp.exe (with p6h.cnf)
- * \emtex\mspito.bat Call for dvimsp.exe (with ito.cnf)
- * \emtex\mspito.cmd Call for dvimsp.exe (with ito.cnf)
- * \emtex\lj.cnf Configuration file: 300 DPI, LJ
- * \emtex\p6l.cnf Configuration file: 180 DPI, P6L
- + \emtex\p6l_p6m.cnf Configuration file: 180 DPI, P6M
- + \emtex\p6l_p6h.cnf Configuration file: 180 DPI, P6H
- * \emtex\p6m.cnf Configuration file: 360x180 DPI, P6M
- * \emtex\p6m_p6h.cnf Configuration file: 360x180 DPI, P6H
- * \emtex\p6h.cnf Configuration file: 360 DPI, P6H
- * \emtex\ito.cnf Configuration file: 160x144 DPI, ITO
- * \emtex\fx.cnf Configuration file: 240x216 DPI, FX
- + \emtex\oldfonts.sub Font substitution file (use old font libs)
- + \emtex\newfonts.sub Font substitution file (use new font libs)
- + \emtex\fontlist Font list (used with fontlib)
- + \emtex\newfonts.bat Convert font library files to new format
- + \emtex\newfonts.cmd Convert font library files to new format
- + \emtex\oldfonts.bat Convert font library files to old format
- + \emtex\oldfonts.cmd Convert font library files to old format
- + \emtex\fli_lj.cmd Create font library files LJ_*
- + \emtex\fli_fx.cmd Create font library files FX_*
- + \emtex\fli_p6l.cmd Create font library files P6L_*
- + \emtex\fli_p6m.cmd Create font library files P6M_*
- + \emtex\fli_p6h.cmd Create font library files P6H_*
- + \emtex\fli_ito.cmd Create font library files ITO_*
- + \emtex\ilf_lj.cmd Unpack font library files LJ_*
- + \emtex\ilf_fx.cmd Unpack font library files FX_*
- + \emtex\ilf_p6l.cmd Unpack font library files P6L_*
- + \emtex\ilf_p6m.cmd Unpack font library files P6M_*
- + \emtex\ilf_p6h.cmd Unpack font library files P6H_*
- + \emtex\ilf_ito.cmd Unpack font library files ITO_*
-
- + \emtex\remove\dvidrv.rem Package contents listing for `remove'
-
-
- DVIDRVMA package
- ----------------
-
- + \emtex\doc\english\dvidrvma.doc Printing the dvidrv manual (English)
- + \emtex\doc\english\dvidrv.dvi The dvidrv manual (English)
- * \emtex\doc\german\dvidrvma.doc Printing the dvidrv manual (German)
- * \emtex\doc\german\dvidrv.dvi The dvidrv manual (German)
-
- \emtex\doc\gr180\dvitrans.0 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.1 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.2 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.3 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.4 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.5 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.6 Graphic file (180 DPI)
- \emtex\doc\gr180\dvitrans.7 Graphic file (180 DPI)
-
- \emtex\doc\gr300\dvitrans.0 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.1 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.2 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.3 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.4 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.5 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.6 Graphic file (300 DPI)
- \emtex\doc\gr300\dvitrans.7 Graphic file (300 DPI)
-
- \emtex\doc\gr360\dvitrans.0 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.1 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.2 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.3 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.4 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.5 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.6 Graphic file (360 DPI)
- \emtex\doc\gr360\dvitrans.7 Graphic file (360 DPI)
-
- + \emtex\remove\dvidrvma.rem Package contents listing for `remove'
-
-
- EMSY package
- ------------
-
- \emtex\emsyproo.bat Create proof sheet for emsy10
- \emtex\emsysmok.bat Create smoke proof for emsy10
-
- \emtex\texinput\emsymb.sty Document style option: emsymb
- \emtex\texinput\emsymb.tex Macros for plain TeX
-
- \emtex\mfinput\emsy.mf em symbol font
- \emtex\mfinput\emsy10.mf em symbol font 10pt
- \emtex\mfinput\emsy5.mf em symbol font 5pt
- \emtex\mfinput\emsy6.mf em symbol font 6pt
- \emtex\mfinput\emsy7.mf em symbol font 7pt
- \emtex\mfinput\emsy8.mf em symbol font 8pt
- \emtex\mfinput\emsy9.mf em symbol font 9pt
-
- \emtex\tfm\emsy10.tfm em symbol font 10pt
- \emtex\tfm\emsy5.tfm em symbol font 5pt
- \emtex\tfm\emsy6.tfm em symbol font 6pt
- \emtex\tfm\emsy7.tfm em symbol font 7pt
- \emtex\tfm\emsy8.tfm em symbol font 8pt
- \emtex\tfm\emsy9.tfm em symbol font 9pt
-
- \emtex\mfjob\emsy.mfj MFjob file for emsy fonts
-
- + \emtex\remove\emsy.rem Package contents listing for `remove'
-
-
- GBLATEX package
- ---------------
-
- * \emtex\gblatex.bat Calling LaTeX (German hyphenation)
- * \emtex\gblatex.cmd Calling LaTeX (German hyphenation)
-
- * \emtex\btexfmts\lplaing.fmt fmt file for LaTeX (German hyphenation)
- * \emtex\btexfmts\lplaing.log log file of lplaing.fmt
- + \emtex\btexfmts\gslifmt.cmd Create fmt file for SliTeX
- + \emtex\btexfmts\gslifmt.bat Create fmt file for SliTeX
-
- + \emtex\remove\gblatex.rem Package contents listing for `remove'
-
-
- GBTEX package
- -------------
-
- + \emtex\btexfmts\gfmt.bat Create fmt files
- + \emtex\btexfmts\gfmt.cmd Create fmt files
- * \emtex\btexfmts\plaing.fmt plain TeX (German hyphenation)
- * \emtex\btexfmts\plaing.log log file of plaing.fmt
-
- + \emtex\remove\gbtex.rem Package contents listing for `remove'
-
-
- GLATEX package
- --------------
-
- * \emtex\doc\lkurz.dvi LaTeX brief instructions of H. Partl (German)
-
- * \emtex\glatex.bat Call LaTeX (German hyphenation)
- * \emtex\glatex.cmd Call LaTeX (German hyphenation)
-
- * \emtex\texfmts\lplaing.fmt fmt file for LaTeX (German hyphenation)
- * \emtex\texfmts\lplaing.log log file of lplaing.fmt
- + \emtex\texfmts\gslifmt.cmd Create fmt file for SliTeX
- + \emtex\texfmts\gslifmt.bat Create fmt file for SliTeX
-
- + \emtex\remove\glatex.rem Package contents listing for `remove'
-
-
- GTEX package
- ------------
-
- * \emtex\doc\germdoc.dvi Instructions for german.sty
-
- * \emtex\gtex.bat Call plain TeX (German hyphenation)
- * \emtex\gtex.cmd Call plain TeX (German hyphenation)
-
- * \emtex\texfmts\plaing.fmt plain TeX (German hyphenation)
- * \emtex\texfmts\plaing.log log file of plaing.fmt
- + \emtex\texfmts\gfmt.bat Create fmt files
- + \emtex\texfmts\gfmt.cmd Create fmt files
-
- + \emtex\texinput\ghyphen.min German hyphenations patterns
- + \emtex\texinput\ghyphen.max German hyphenations patterns (for bigTeX)
- * \emtex\texinput\german.sty Uniform German TeX commands
- * \emtex\texinput\germdoc.tex Instructions for german.sty
-
- + \emtex\remove\gtex.rem Package contents listing for `remove'
-
-
- LATEX package
- -------------
-
- * \emtex\doc\latex.bug Bugs in and changes to LaTeX
- * \emtex\doc\latex.ins Installation instructions (not needed)
- \emtex\doc\local.gid Ultra brief instructions
- * \emtex\doc\local.dvi Local guide
-
- \emtex\latex.bat Call LaTeX (American hyphenation)
- \emtex\latex.cmd Call LaTeX (American hyphenation)
-
- * \emtex\texfmts\lplain.fmt fmt file for LaTeX (Amer. hyphenation)
- * \emtex\texfmts\lplain.log log file of lplain.fmt
- + \emtex\texfmts\slifmt.cmd Create fmt file for SliTeX
- + \emtex\texfmts\slifmt.bat Create fmt file for SliTeX
-
- + \emtex\texinput\a4.sty Document style option: A4 page format
- * \emtex\texinput\addendum.tex Include file for local.tex
- * \emtex\texinput\art10.sty Document style option: article 10pt
- * \emtex\texinput\art11.sty Document style option: article 11pt
- * \emtex\texinput\art12.sty Document style option: article 12pt
- * \emtex\texinput\article.sty Document style: article
- * \emtex\texinput\bezier.sty Document style: bezier
- * \emtex\texinput\bk10.sty Document style option: book 10pt
- * \emtex\texinput\bk11.sty Document style option: book 11pt
- * \emtex\texinput\bk12.sty Document style option: book 12pt
- * \emtex\texinput\book.sty Document style: book
- * \emtex\texinput\fleqn.sty Document style option: fleqn
- * \emtex\texinput\idx.tex idx file to print
- * \emtex\texinput\ifthen.sty Document style option: ifthen
- * \emtex\texinput\lablst.tex Print contents and cross references
- * \emtex\texinput\latex.tex LaTeX source file
- * \emtex\texinput\leqno.sty Document style option: leqno
- * \emtex\texinput\letter.sty Document style: letter
- \emtex\texinput\letter.tex Information on letter.sty
- * \emtex\texinput\lfonts.tex LaTeX source file (font definitions)
- + \emtex\texinput\lhyphen.ger Load German hyphenation patterns
- + \emtex\texinput\lhyphen.tex Load English hyphenation patterns
- * \emtex\texinput\local.tex Local guide
- * \emtex\texinput\lplain.tex LaTeX source file
- * \emtex\texinput\makeidx.sty Document style option: makeidx
- * \emtex\texinput\openbib.sty Document style option: openbib
- * \emtex\texinput\proc.sty Document style: proc
- * \emtex\texinput\rep10.sty Document style option: report 10pt
- * \emtex\texinput\rep11.sty Document style option: report 11pt
- * \emtex\texinput\rep12.sty Document style option: report 12pt
- * \emtex\texinput\report.sty Document style: report
- * \emtex\texinput\sample.tex Example text
- * \emtex\texinput\sfonts.tex SliTeX source file (font definitions)
- * \emtex\texinput\showidx.sty Document style option: showidx
- * \emtex\texinput\slides.sty Document style: slide
- * \emtex\texinput\slitex.tex SliTeX source file
- * \emtex\texinput\small.tex Example text
- * \emtex\texinput\splain.tex SliTeX source file
- \emtex\texinput\suthesis.sty Doc. style option: Stanford Univ. PhD thesis
- + \emtex\texinput\testa4.tex Test page (for margins)
- * \emtex\texinput\testpage.tex Test page (for margins)
- * \emtex\texinput\titlepag.sty Document style option: titlepage
- \emtex\texinput\tryfonts.tex Try text fonts
- * \emtex\texinput\twocolum.sty Document style option: twocolumn
-
- + \emtex\tfm\lcircle1.tfm LaTeX circle font (thin)
- + \emtex\tfm\lcirclew.tfm LaTeX circle font (wide)
- \emtex\tfm\lasy10.tfm LaTeX symbols 10pt
- \emtex\tfm\lasy5.tfm LaTeX symbols 5pt
- \emtex\tfm\lasy6.tfm LaTeX symbols 6pt
- \emtex\tfm\lasy7.tfm LaTeX symbols 7pt
- \emtex\tfm\lasy8.tfm LaTeX symbols 8pt
- \emtex\tfm\lasy9.tfm LaTeX symbols 9pt
- \emtex\tfm\lasyb10.tfm Bold LaTeX symbols 9pt
- \emtex\tfm\lcmss8.tfm SliTeX sans serif 8pt
- \emtex\tfm\lcmssb8.tfm SliTeX sans serif Bold 8pt
- \emtex\tfm\lcmssi8.tfm SliTeX sans slanted 8pt
- \emtex\tfm\line10.tfm LaTeX line font (small)
- \emtex\tfm\linew10.tfm LaTeX line font (wide)
- + \emtex\tfm\icmcsc10.tfm Invisible cmcsc10
- \emtex\tfm\icmex10.tfm Invisible cmex10
- \emtex\tfm\icmmi8.tfm Invisible cmmi8
- \emtex\tfm\icmsy8.tfm Invisible cmsy8
- \emtex\tfm\icmtt8.tfm Invisible cmtt8
- \emtex\tfm\ilasy8.tfm Invisible lasy8
- \emtex\tfm\ilcmss8.tfm Invisible lcmss8
- \emtex\tfm\ilcmssb8.tfm Invisible lcmssb8
- \emtex\tfm\ilcmssi8.tfm Invisible lcmssi8
-
- + \emtex\remove\latex.rem Package contents listing for `remove'
-
-
- LATEXDOC package
- ----------------
-
- * \emtex\texinput\art10.doc Document style option: article 10pt
- * \emtex\texinput\art11.doc Document style option: article 11pt
- * \emtex\texinput\art12.doc Document style option: article 12pt
- * \emtex\texinput\article.doc Document style: article
- * \emtex\texinput\bezier.doc Document style: bezier
- * \emtex\texinput\bk10.doc Document style option: book 10pt
- * \emtex\texinput\bk11.doc Document style option: book 11pt
- * \emtex\texinput\bk12.doc Document style option: book 12pt
- * \emtex\texinput\book.doc Document style: book
- * \emtex\texinput\fleqn.doc Document style option: fleqn
- * \emtex\texinput\ifthen.doc Document style option: ifthen
- * \emtex\texinput\leqno.doc Document style option: leqno
- * \emtex\texinput\letter.doc Document style: letter
- * \emtex\texinput\makeidx.doc Document style option: makeidx
- * \emtex\texinput\openbib.doc Document style option: openbib
- * \emtex\texinput\proc.doc Document style: proc
- * \emtex\texinput\rep10.doc Document style option: report 10pt
- * \emtex\texinput\rep11.doc Document style option: report 11pt
- * \emtex\texinput\rep12.doc Document style option: report 12pt
- * \emtex\texinput\report.doc Document style: report
- * \emtex\texinput\showidx.doc Document style option: showidx
- * \emtex\texinput\slides.doc Document style: slide
- \emtex\texinput\suthesis.doc Doc. style option: Stanford Univ. PhD thesis
- * \emtex\texinput\titlepag.doc Document style option: titlepage
- * \emtex\texinput\twocolum.doc Document style option: twocolumn
-
- + \emtex\remove\latexdoc.rem Package contents listing for `remove'
-
-
- LKURZ package
- -------------
-
- * \emtex\texinput\lkurz.tex LaTeX brief instructions (German)
- * \emtex\texinput\lksym.tex LaTeX brief instructions (include file)
- * \emtex\texinput\lk1.tex LaTeX brief instructions (include file)
- * \emtex\texinput\lk2.tex LaTeX brief instructions (include file)
- * \emtex\texinput\lk3.tex LaTeX brief instructions (include file)
- * \emtex\texinput\lk4.tex LaTeX brief instructions (include file)
-
- + \emtex\remove\lkurz.rem Package contents listing for `remove'
-
-
- MAKEINDX package
- ----------------
-
- * \emtex\makeindx.exe MakeIndex program
- * \emtex\doc\makeindx.cpy Distribution notice for MakeIndex
- + \emtex\doc\makeindx.doc Detailed instructions for MakeIndex
- * \emtex\texinput\makeindx.tex Instructions for MakeIndex
-
- + \emtex\remove\makeindx.rem Package contents listing for `remove'
-
-
- MF package
- ----------
-
- + \emtex\doc\english\mfware.doc Instructions for METAFONT etc. (English)
- * \emtex\doc\german\mfware.doc Instructions for METAFONT etc. (German)
- * \emtex\doc\cm85.bug Mistakes list for CM fonts
-
- * \emtex\mf.exe METAFONT (DOS, OS/2 real mode)
- * \emtex\mf286.exe METAFONT (DOS, OS/2 real mode, 80286 CPU)
- * \emtex\mfp.exe METAFONT (OS/2 protected mode)
- + \emtex\mfpm.ovl Graphic output for mfp.exe (overlay)
-
- \emtex\mfbases\bas.bat Create bas files
- \emtex\mfbases\bas.cmd Create bas files
- * \emtex\mfbases\cm.bas Computer Modern METAFONT base
- * \emtex\mfbases\cm.log Log file for cm.bas
- \emtex\mfbases\mf.poo Pool file (string list) for INIMF
- * \emtex\mfbases\plain.bas Plain METAFONT base
- * \emtex\mfbases\plain.log Log file for plain.bas
-
- \emtex\mfinput\3test.mf Font tests
- \emtex\mfinput\5test.mf Font tests
- \emtex\mfinput\6test.mf Font tests
- \emtex\mfinput\accent.mf Accents for roman/italic fonts
- \emtex\mfinput\bigacc.mf Big accents for cmex#
- \emtex\mfinput\bigdel.mf Big delimiter for cmex#
- \emtex\mfinput\bigop.mf Big operators for cmex#
- \emtex\mfinput\btest.mf Font tests
- \emtex\mfinput\calu.mf Calligraphic capitals
- + \emtex\mfinput\lcircle.mf LaTeX circles and arcs
- + \emtex\mfinput\lcircle1.mf LaTeX circles and arcs (small)
- + \emtex\mfinput\lcirclew.mf LaTeX circles and arcs (wide)
- \emtex\mfinput\cm.ini Create CM base
- \emtex\mfinput\cmb10.mf CM Bold Roman 10pt
- \emtex\mfinput\cmbase.mf CM Base
- \emtex\mfinput\cmbsy10.mf CM Bold Math Symbols 10pt
- \emtex\mfinput\cmbx10.mf CM Bold Extended Roman 10pt
- \emtex\mfinput\cmbx12.mf CM Bold Extended Roman 12pt
- \emtex\mfinput\cmbx5.mf CM Bold Extended Roman 5pt
- \emtex\mfinput\cmbx6.mf CM Bold Extended Roman 6pt
- \emtex\mfinput\cmbx7.mf CM Bold Extended Roman 7pt
- \emtex\mfinput\cmbx8.mf CM Bold Extended Roman 8pt
- \emtex\mfinput\cmbx9.mf CM Bold Extended Roman 9pt
- \emtex\mfinput\cmbxsl10.mf CM Bold Extended Slanted Roman 10pt
- \emtex\mfinput\cmbxti10.mf CM Bold Extended Text Italic 10pt
- \emtex\mfinput\cmcsc10.mf CM Roman Caps and Small Caps 10pt
- \emtex\mfinput\cmdunh10.mf CM Dunhill Roman 10pt
- \emtex\mfinput\cmex10.mf CM Math Extension 10pt
- \emtex\mfinput\cmex9.mf CM Math Extension 9pt
- \emtex\mfinput\cmff10.mf CM Funny Roman 10pt
- \emtex\mfinput\cmfi10.mf CM Funny Italic 10pt
- \emtex\mfinput\cmfib8.mf CM Roman Fibonacci Font 10pt
- \emtex\mfinput\cminch.mf CM Inch-High Sans Serif Bold Ext. Caps & Dig
- \emtex\mfinput\cmitt10.mf CM Italic Typewriter Text (10pt)
- \emtex\mfinput\cmmi10.mf CM Math Italic 10pt
- \emtex\mfinput\cmmi12.mf CM Math Italic 12pt
- \emtex\mfinput\cmmi5.mf CM Math Italic 5pt
- \emtex\mfinput\cmmi6.mf CM Math Italic 6pt
- \emtex\mfinput\cmmi7.mf CM Math Italic 7pt
- \emtex\mfinput\cmmi8.mf CM Math Italic 8pt
- \emtex\mfinput\cmmi9.mf CM Math Italic 9pt
- \emtex\mfinput\cmmib10.mf CM Math Italic Bold 10pt
- \emtex\mfinput\cmr10.mf CM Roman 10pt
- \emtex\mfinput\cmr12.mf CM Roman 12pt
- \emtex\mfinput\cmr17.mf CM Roman 17pt
- \emtex\mfinput\cmr5.mf CM Roman 5pt
- \emtex\mfinput\cmr6.mf CM Roman 6pt
- \emtex\mfinput\cmr7.mf CM Roman 7pt
- \emtex\mfinput\cmr8.mf CM Roman 8pt
- \emtex\mfinput\cmr9.mf CM Roman 9pt
- \emtex\mfinput\cmsl10.mf CM Slanted Roman 10pt
- \emtex\mfinput\cmsl12.mf CM Slanted Roman 12pt
- \emtex\mfinput\cmsl8.mf CM Slanted Roman 8pt
- \emtex\mfinput\cmsl9.mf CM Slanted Roman 9pt
- \emtex\mfinput\cmsltt10.mf CM Slanted Typewriter Text (10pt)
- \emtex\mfinput\cmss10.mf CM Sans Serif 10pt
- \emtex\mfinput\cmss12.mf CM Sans Serif 12pt
- \emtex\mfinput\cmss17.mf CM Sans Serif 17pt
- \emtex\mfinput\cmss8.mf CM Sans Serif 8pt
- \emtex\mfinput\cmss9.mf CM Sans Serif 9pt
- \emtex\mfinput\cmssbx10.mf CM Sans Serif Bold Extended 10pt
- \emtex\mfinput\cmssdc10.mf CM Sans Serif Demibold Condensed 10pt
- \emtex\mfinput\cmssi10.mf CM Slanted Sans Serif 10pt
- \emtex\mfinput\cmssi12.mf CM Slanted Sans Serif 12pt
- \emtex\mfinput\cmssi17.mf CM Slanted Sans Serif 17pt
- \emtex\mfinput\cmssi8.mf CM Slanted Sans Serif 8pt
- \emtex\mfinput\cmssi9.mf CM Slanted Sans Serif 9pt
- \emtex\mfinput\cmssq8.mf CM Sans Serif Quotation Style 8pt
- \emtex\mfinput\cmssqi8.mf CM Sans Serif Quotation Style Slanted 8pt
- \emtex\mfinput\cmsy10.mf CM Math Symbols 10pt
- \emtex\mfinput\cmsy5.mf CM Math Symbols 5pt
- \emtex\mfinput\cmsy6.mf CM Math Symbols 6pt
- \emtex\mfinput\cmsy7.mf CM Math Symbols 7pt
- \emtex\mfinput\cmsy8.mf CM Math Symbols 8pt
- \emtex\mfinput\cmsy9.mf CM Math Symbols 9pt
- \emtex\mfinput\cmtcsc10.mf CM Typewriter Caps and Small Caps (10pt)
- \emtex\mfinput\cmtex10.mf CM TeX Extended ASCII characters (10pt)
- \emtex\mfinput\cmtex8.mf CM TeX Extended ASCII characters (8pt)
- \emtex\mfinput\cmtex9.mf CM TeX Extended ASCII characters (9pt)
- \emtex\mfinput\cmti10.mf CM Text Italic 10pt
- \emtex\mfinput\cmti12.mf CM Text Italic 12pt
- \emtex\mfinput\cmti7.mf CM Text Italic 7pt
- \emtex\mfinput\cmti8.mf CM Text Italic 8pt
- \emtex\mfinput\cmti9.mf CM Text Italic 9pt
- \emtex\mfinput\cmtt10.mf CM Typewriter Text (10pt)
- \emtex\mfinput\cmtt12.mf CM Typewriter Text (12pt)
- \emtex\mfinput\cmtt8.mf CM Typewriter Text (8pt)
- \emtex\mfinput\cmtt9.mf CM Typewriter Text (9pt)
- \emtex\mfinput\cmu10.mf CM Unslanted Italic 10pt
- \emtex\mfinput\cmvtt10.mf CM Variable-Width Typewriter Text (10pt)
- \emtex\mfinput\comlig.mf Ligatures for roman/italic fonts
- \emtex\mfinput\csc.mf Caps and small Ccaps
- \emtex\mfinput\cscspu.mf `I', `J', `ss' for caps and small caps
- \emtex\mfinput\ctest.mf Font tests
- \emtex\mfinput\ega.mf Changes for EGA
- \emtex\mfinput\expr.mf Examples from the METAFONTbook
- \emtex\mfinput\ftest.mf Font tests
- \emtex\mfinput\grayf.mf Create gray font
- \emtex\mfinput\greekl.mf Small Greek letters
- \emtex\mfinput\greeku.mf Large Greek letters
- \emtex\mfinput\halftone.mf Create halftone font
- \emtex\mfinput\icmex10.mf CM Math Extension 10pt invisible
- \emtex\mfinput\icmmi8.mf CM Math Italic 10pt invisible
- \emtex\mfinput\icmsy8.mf CM Math Symbols 10pt invisible
- \emtex\mfinput\icmtt8.mf CM Typewriter Text 10pt invisible
- \emtex\mfinput\ilasy8.mf LaTeX Symbols 8pt invisible
- \emtex\mfinput\ilcmss8.mf SliTeX Sans Serif 8pt invisble
- \emtex\mfinput\ilcmssb8.mf SliTeX Sans Serif Bold 8pt invisble
- \emtex\mfinput\ilcmssi8.mf SliTeX Sans Serif Slanted 8pt invisble
- \emtex\mfinput\io.mf Examples from the METAFONTbook
- \emtex\mfinput\itald.mf CM Italic (digits)
- \emtex\mfinput\italig.mf CM Italic (f-Ligatures)
- \emtex\mfinput\itall.mf CM Italic (small letters)
- \emtex\mfinput\italms.mf CM Math Italic (various symbols)
- \emtex\mfinput\italp.mf CM Italic (`$', `&', `?')
- \emtex\mfinput\italsp.mf CM Italic (Special symbols)
- \emtex\mfinput\itest.mf Font tests
- \emtex\mfinput\lasy.mf LaTeX Symbols
- \emtex\mfinput\lasy10.mf LaTeX Symbols 10pt
- \emtex\mfinput\lasy5.mf LaTeX Symbols 5pt
- \emtex\mfinput\lasy6.mf LaTeX Symbols 6pt
- \emtex\mfinput\lasy7.mf LaTeX Symbols 7pt
- \emtex\mfinput\lasy8.mf LaTeX Symbols 8pt
- \emtex\mfinput\lasy9.mf LaTeX Symbols 9pt
- \emtex\mfinput\lasyb10.mf Bold LaTeX Symbols 9pt
- \emtex\mfinput\lcmss8.mf SliTeX Sans Serif 8pt
- \emtex\mfinput\lcmssb8.mf SliTeX Sans Serif Bold 8pt
- \emtex\mfinput\lcmssi8.mf SliTeX Sans Slanted 8pt
- \emtex\mfinput\line.mf LaTeX line segments
- \emtex\mfinput\line10.mf LaTeX line segments (small)
- \emtex\mfinput\linew10.mf LaTeX line segments (wide)
- * \emtex\mfinput\local.mf Local changes for plain/cm
- * \emtex\mfinput\logo.mf METAFONT logo
- \emtex\mfinput\logo10.mf METAFONT logo 10pt
- \emtex\mfinput\logo8.mf METAFONT logo 8pt
- \emtex\mfinput\logo9.mf METAFONT logo 9pt
- \emtex\mfinput\logobf10.mf Boldface METAFONT logo 10pt
- \emtex\mfinput\logosl10.mf Slanted METAFONT logo 10pt
- \emtex\mfinput\mathex.mf CM Math Extension
- \emtex\mfinput\mathit.mf CM Math Italic
- \emtex\mfinput\mathsy.mf CM Symbols
- \emtex\mfinput\mtest.mf Font tests
- \emtex\mfinput\olddig.mf Digits in old style
- \emtex\mfinput\plain.ini Create plain base
- * \emtex\mfinput\plain.mf plain base
- \emtex\mfinput\punct.mf Punctuation Marks for roman/italic fonts
- \emtex\mfinput\qtest.mf Font tests
- \emtex\mfinput\roman.mf CM Roman
- \emtex\mfinput\romand.mf CM Roman (digits)
- * \emtex\mfinput\romanl.mf CM Roman (small letters)
- \emtex\mfinput\romanp.mf CM Roman (`$', `&', `?')
- \emtex\mfinput\romanu.mf CM Roman (large letters)
- \emtex\mfinput\romlig.mf CM Roman (ligatures)
- \emtex\mfinput\romms.mf CM Math Italic (vertical symbols)
- \emtex\mfinput\romspl.mf CM Roman (special symbols)
- \emtex\mfinput\romspu.mf CM Roman (special symbols)
- \emtex\mfinput\romsub.mf CM Roman (special symbols)
- \emtex\mfinput\rtest.mf Font tests
- \emtex\mfinput\slant.mf Create slant font
- \emtex\mfinput\sroman.mf SliTeX Roman
- \emtex\mfinput\sromanu.mf SliTeX Roman (large letters)
- \emtex\mfinput\stest.mf Font tests
- \emtex\mfinput\sym.mf Symbols
- * \emtex\mfinput\symbol.mf Symbols for Mathematical fonts
- \emtex\mfinput\texset.mf CM TeX extended ASCII characters
- \emtex\mfinput\textit.mf CM Text italic
- \emtex\mfinput\title.mf Large letters and digits (for cminch)
- \emtex\mfinput\tset.mf Special symbols for cmtex#-fonts
- \emtex\mfinput\tsetsl.mf Special symbols for cmtex#-fonts
- \emtex\mfinput\ttest.mf Font tests
- \emtex\mfinput\waits.mf local.mf as used at WAITS
- \emtex\mfinput\xtest.mf Font tests
- \emtex\mfinput\ztest.mf Font tests
-
- * \emtex\texinput\testfont.tex Test text for a font
-
- + \emtex\remove\mf.rem Package contents listing for `remove'
-
-
- MFWARE package
- --------------
-
- + \emtex\doc\english\mfjob.doc Instructions for MFjob (English)
- * \emtex\doc\german\mfjob.doc Instructions for MFjob (German)
-
- * \emtex\chtopx.exe Conversion program .chr -> .pxl
- * \emtex\gftodvi.exe Create METAFONT proof sheets
- * \emtex\gftopk.exe Conversion program .#gf -> .pk
- * \emtex\gftopxl.exe Conversion program .#gf -> .pxl
- * \emtex\gftype.exe List .#gf-files
- * \emtex\mft.exe Format METAFONT source text
- * \emtex\pktogf.exe Conversion program .pk -> .gf
- * \emtex\pktopx.exe Conversion program .pk -> .pxl
- * \emtex\pktype.exe List .pk files
- * \emtex\pxtoch.exe Conversion program .pxl -> .chr
- * \emtex\pxtopk.exe Conversion program .pxl -> .pk
- * \emtex\mfjob.exe MFjob program
- * \emtex\mfjob1.ovl MFjob program (overlay)
- * \emtex\mfjob2.ovl MFjob program (overlay)
-
- * \emtex\mfjob\all.mfj MFjob file: standard fonts
- * \emtex\mfjob\latex.mfj MFjob file: cmcsc10 for LaTeX
- * \emtex\mfjob\modes.mfj MFjob file: Include file for *.mfj
- * \emtex\mfjob\gftodvi.mfj MFjob file: black, gray, and slant fonts
- + \emtex\mfjob\slitex.mfj MFjob file: SliTeX fonts
- + \emtex\mfjob\texbook.mfj MFjob file: Fonts for The TeXbook
- + \emtex\mfjob\amsfonts.mfj MFjob file: AMSFonts 2.0 (complete).
- + \emtex\mfjob\cyrillic.mfj MFjob file: AMSFonts 2.0 (Cyrillic).
- + \emtex\mfjob\euler.mfj MFjob file: AMSFonts 2.0 (Euler fonts).
- + \emtex\mfjob\extracm.mfj MFjob file: AMSFonts 2.0 (extracm).
- + \emtex\mfjob\symbols.mfj MFjob file: AMSFonts 2.0 (symbol fonts).
-
- \emtex\mfinput\cmbase.mft MFT style file for cm METAFONT base
- \emtex\mfinput\e.mft MFT style file `Computer Modern Typefaces'
- \emtex\mfinput\plain.mft MFT style file for plain METAFONT base
- \emtex\mfinput\graylj.mf Gray font for HP LaserJet+
- \emtex\mfinput\grayfx.mf Gray font for EPSON FX-80
- \emtex\mfinput\blacklj.mf Black font for HP LaserJet+
- \emtex\mfinput\blackfx.mf Black font for EPSON FX-80
- \emtex\mfinput\slantlj.mf Slant font for HP LaserJet+
- \emtex\mfinput\slantfx.mf Slant font for EPSON FX-80
-
- * \emtex\texinput\mftmac.tex Macros for TeX and MFT
-
- \emtex\tfm\graylj.tfm Gray font for HP LaserJet+
- \emtex\tfm\grayfx.tfm Gray font for EPSON FX-80
- \emtex\tfm\blacklj.tfm Black font for HP LaserJet+
- \emtex\tfm\blackfx.tfm Black font for EPSON FX-80
- \emtex\tfm\slantlj.tfm Slant font for HP LaserJet+
- \emtex\tfm\slantfx.tfm Slant font for EPSON FX-80
-
- + \emtex\remove\mfware.rem Package contents listing for `remove'
-
-
- MISC_MF package
- ---------------
-
- * \emtex\mfinput\cmman.mf Variants of CM for the TeX/METAFONT manuals
- \emtex\mfinput\life.mf Examples from the METAFONTbook
- * \emtex\mfinput\manfnt.mf Special font for the TeX/METAFONT manuals
- \emtex\mfinput\mfman.mf Most of the figures for The METAFONTbook
-
- + \emtex\remove\misc_mf.rem Package contents listing for `remove'
-
-
- PICTEX package
- --------------
-
- * \emtex\texinput\latexpic.tex LaTeX objects for PiCTeX under plain TeX
- \emtex\texinput\pictex.tex Main PiCTeX file
- \emtex\texinput\postpict.tex PiCTeX under LaTeX
- \emtex\texinput\prepicte.tex PiCTeX under LaTeX
-
- + \emtex\remove\pictex.rem Package contents listing for `remove'
-
-
- PKEDIT package
- --------------
-
- + \emtex\doc\english\pkedit.doc Instructions for pkedit (English)
- * \emtex\doc\german\pkedit.doc Instructions for pkedit (German)
-
- * \emtex\pkedit.exe pkedit program
-
- + \emtex\remove\pkedit.rem Package contents listing for `remove'
-
-
- TEX package
- -----------
-
- + \emtex\doc\english\texware.doc Brief instructions for TeX etc. (English)
- * \emtex\doc\german\texware.doc Brief instructions for TeX etc. (German)
- + \emtex\doc\english\emtex.dvi Instructions for emTeX (English)
- * \emtex\doc\german\emtex.dvi Instructions for emTeX (German)
-
- * \emtex\tex.exe TeX (DOS, OS/2 real mode)
- * \emtex\tex286.exe TeX (DOS, OS/2 real mode, 80286 CPU)
- * \emtex\texp.exe TeX (OS/2 protected mode)
- * \emtex\set-tex.bat Set environment variables
- * \emtex\set-tex.cmd Set environment variables
-
- * \emtex\texfmts\fmt.bat Create fmt files
- * \emtex\texfmts\fmt.cmd Create fmt files
- * \emtex\texfmts\plain.fmt plain TeX (American hyphenation)
- * \emtex\texfmts\plain.log log file of plain.fmt
- * \emtex\texfmts\tex.poo Pool file (string list) for INITeX
-
- + \emtex\texinput\850_tex.tcp Convert code page 850 to TeX commands
- * \emtex\texinput\hyphen.tex American hyphenation patterns
- \emtex\texinput\fntbl.tex Typeset a font table
- * \emtex\texinput\plain.tex plain TeX
- + \emtex\texinput\3.tex Use old formats with TeX 3.0
-
- \emtex\tfm\cmb10.tfm CM Bold Roman 10pt
- \emtex\tfm\cmbsy10.tfm CM Bold Math Symbols 10pt
- \emtex\tfm\cmbx10.tfm CM Bold Extended Roman 10pt
- \emtex\tfm\cmbx12.tfm CM Bold Extended Roman 12pt
- \emtex\tfm\cmbx5.tfm CM Bold Extended Roman 5pt
- \emtex\tfm\cmbx6.tfm CM Bold Extended Roman 6pt
- \emtex\tfm\cmbx7.tfm CM Bold Extended Roman 7pt
- \emtex\tfm\cmbx8.tfm CM Bold Extended Roman 8pt
- \emtex\tfm\cmbx9.tfm CM Bold Extended Roman 9pt
- \emtex\tfm\cmbxsl10.tfm CM Bold Extended Slanted Roman 10pt
- \emtex\tfm\cmbxti10.tfm CM Bold Extended Text Italic 10pt
- \emtex\tfm\cmcsc10.tfm CM Roman Caps and Small Caps 10pt
- \emtex\tfm\cmdunh10.tfm CM Dunhill Roman 10pt
- \emtex\tfm\cmex10.tfm CM Math Extension 10pt
- \emtex\tfm\cmex9.tfm CM Math Extension 9pt
- \emtex\tfm\cmff10.tfm CM Funny Roman 10pt
- \emtex\tfm\cmfi10.tfm CM Funny Italic 10pt
- \emtex\tfm\cmfib8.tfm CM Roman Fibonacci Font 10pt
- \emtex\tfm\cminch.tfm CM Inch-High Sans Serif Bold Ext. Caps & Dig
- \emtex\tfm\cmitt10.tfm CM Italic Typewriter Text (10pt)
- \emtex\tfm\cmmi10.tfm CM Math Italic 10pt
- \emtex\tfm\cmmi12.tfm CM Math Italic 12pt
- \emtex\tfm\cmmi5.tfm CM Math Italic 5pt
- \emtex\tfm\cmmi6.tfm CM Math Italic 6pt
- \emtex\tfm\cmmi7.tfm CM Math Italic 7pt
- \emtex\tfm\cmmi8.tfm CM Math Italic 8pt
- \emtex\tfm\cmmi9.tfm CM Math Italic 9pt
- \emtex\tfm\cmmib10.tfm CM Math Italic Bold 10pt
- \emtex\tfm\cmr10.tfm CM Roman 10pt
- \emtex\tfm\cmr12.tfm CM Roman 12pt
- \emtex\tfm\cmr17.tfm CM Roman 17pt
- \emtex\tfm\cmr5.tfm CM Roman 5pt
- \emtex\tfm\cmr6.tfm CM Roman 6pt
- \emtex\tfm\cmr7.tfm CM Roman 7pt
- \emtex\tfm\cmr8.tfm CM Roman 8pt
- \emtex\tfm\cmr9.tfm CM Roman 9pt
- \emtex\tfm\cmsl10.tfm CM Slanted Roman 10pt
- \emtex\tfm\cmsl12.tfm CM Slanted Roman 12pt
- \emtex\tfm\cmsl8.tfm CM Slanted Roman 8pt
- \emtex\tfm\cmsl9.tfm CM Slanted Roman 9pt
- \emtex\tfm\cmsltt10.tfm CM Slanted Typewriter Text (10pt)
- \emtex\tfm\cmss10.tfm CM Sans Serif 10pt
- \emtex\tfm\cmss12.tfm CM Sans Serif 12pt
- \emtex\tfm\cmss17.tfm CM Sans Serif 17pt
- \emtex\tfm\cmss8.tfm CM Sans Serif 8pt
- \emtex\tfm\cmss9.tfm CM Sans Serif 9pt
- \emtex\tfm\cmssbx10.tfm CM Sans Serif Bold Extended 10pt
- \emtex\tfm\cmssdc10.tfm CM Sans Serif Demibold Condensed 10pt
- \emtex\tfm\cmssi10.tfm CM Slanted Sans Serif 10pt
- \emtex\tfm\cmssi12.tfm CM Slanted Sans Serif 12pt
- \emtex\tfm\cmssi17.tfm CM Slanted Sans Serif 17pt
- \emtex\tfm\cmssi8.tfm CM Slanted Sans Serif 8pt
- \emtex\tfm\cmssi9.tfm CM Slanted Sans Serif 9pt
- \emtex\tfm\cmssq8.tfm CM Sans Serif Quotation Style 8pt
- \emtex\tfm\cmssqi8.tfm CM Sans Serif Quotation Style Slanted 8pt
- \emtex\tfm\cmsy10.tfm CM Math Symbols 10pt
- \emtex\tfm\cmsy5.tfm CM Math Symbols 5pt
- \emtex\tfm\cmsy6.tfm CM Math Symbols 6pt
- \emtex\tfm\cmsy7.tfm CM Math Symbols 7pt
- \emtex\tfm\cmsy8.tfm CM Math Symbols 8pt
- \emtex\tfm\cmsy9.tfm CM Math Symbols 9pt
- \emtex\tfm\cmtcsc10.tfm CM Typewriter Caps and Small Caps (10pt)
- \emtex\tfm\cmtex10.tfm CM TeX Extended ASCII characters (10pt)
- \emtex\tfm\cmtex8.tfm CM TeX Extended ASCII characters (8pt)
- \emtex\tfm\cmtex9.tfm CM TeX Extended ASCII characters (9pt)
- \emtex\tfm\cmti10.tfm CM Text Italic 10pt
- \emtex\tfm\cmti12.tfm CM Text Italic 12pt
- \emtex\tfm\cmti7.tfm CM Text Italic 7pt
- \emtex\tfm\cmti8.tfm CM Text Italic 8pt
- \emtex\tfm\cmti9.tfm CM Text Italic 9pt
- \emtex\tfm\cmtt10.tfm CM Typewriter Text (10pt)
- \emtex\tfm\cmtt12.tfm CM Typewriter Text (12pt)
- \emtex\tfm\cmtt8.tfm CM Typewriter Text (8pt)
- \emtex\tfm\cmtt9.tfm CM Typewriter Text (9pt)
- \emtex\tfm\cmu10.tfm CM Unslanted Italic 10pt
- \emtex\tfm\cmvtt10.tfm CM Variable-Width Typewriter Text (10pt)
- \emtex\tfm\dummy.tfm Empty font
- \emtex\tfm\logo10.tfm METAFONT logo 10pt
- \emtex\tfm\logo8.tfm METAFONT logo 8pt
- \emtex\tfm\logo9.tfm METAFONT logo 9pt
- \emtex\tfm\logobf10.tfm Boldface METAFONT logo 10pt
- \emtex\tfm\logosl10.tfm Slanted METAFONT logo 10pt
- * \emtex\tfm\cmman.tfm Variants of CM for the TeX/METAFONT manuals
- * \emtex\tfm\manfnt.tfm Special font for the TeX/METAFONT manuals
-
- + \emtex\remove\tex.rem Package contents listing for `remove'
-
-
- TEXCAD package
- --------------
-
- * \emtex\texcad.exe The TeXcad program
- * \emtex\gh.bat Calling editor, LaTeX, TeXcad, and Previewer
- \emtex\ask.exe Auxiliary program for gh.bat
- \emtex\texcad.opt TeXcad parameters
- \emtex\att.bgi Video graphics driver
- \emtex\cga.bgi Video graphics driver
- \emtex\herc.bgi Video graphics driver
- \emtex\egavga.bgi Video graphics driver
- \emtex\ibm8514.bgi Video graphics driver
- \emtex\pc3270.bgi Video graphics driver
-
- + \emtex\doc\english\tcman.dvi TeXcad manual (English)
- * \emtex\doc\german\tcman.dvi TeXcad manual (German)
- + \emtex\doc\english\texcad.ver Changes from older versions (English).
- + \emtex\doc\german\texcad.ver Changes from older versions (German).
-
- \emtex\texinput\emlines.sty Doc. Style Opt.: lines with arbitrary slopes
- * \emtex\texinput\emlines2.sty Ditto, cf. tcman.dvi
- * \emtex\texinput\gh.tex Testing LaTeX documents and pictures
-
- + \emtex\remove\texcad.rem Package contents listing for `remove'
-
-
- TEXWARE package
- ---------------
-
- + \emtex\doc\english\texchk.doc Instructions for texchk (English)
- * \emtex\doc\german\texchk.doc Instructions for texchk (German)
-
- * \emtex\texchk.exe Syntax checker for LaTeX
- * \emtex\texconv.exe Text conversion (ae -> \"a etc.)
- + \emtex\maketcp.exe Create tcp files
- * \emtex\dvitype.exe List a dvi file
- * \emtex\pltotf.exe Conversion program .pl -> .tfm
- * \emtex\tftopl.exe Conversion program .tfm -> .pl
- + \emtex\vftovp.exe Conversion program .vf & .tfm -> .vpl
- + \emtex\vptovf.exe Conversion program .vpl -> .vf & .tfm
-
- + \emtex\remove\texware.rem Package contents listing for `remove'
-
-
- WEB package
- -----------
-
- * \emtex\doc\web.doc Brief instructions for the WEB programs
-
- * \emtex\weave.exe WEAVE (.web -> .tex)
- * \emtex\tangle.exe TANGLE (.web -> .pas)
- * \emtex\pooltype.exe List a pool file
-
- * \emtex\texinput\webmac.tex Macros for TeX and WEAVE
- * \emtex\texinput\webman.tex Manual for the WEB system.
-
- + \emtex\remove\web.rem Package contents listing for `remove'
-
-
- Fonts
- -----
-
- See the section `Further diskettes' for a listing of the devices for
- which fonts can be generated.
-
- The fonts will be generated in the following magnifications:
-
- \magstep0 (scaled 1000)
- \magstephalf (scaled 1095)
- \magstep1 (scaled 1200)
- \magstep2 (scaled 1440)
- \magstep3 (scaled 1728)
- \magstep4 (scaled 2074)
- \magstep5 (scaled 2488)
-
- In each magnification there are the following fonts:
-
- cmr5 cmr6 cmr7 cmr8 cmr9 cmr10 cmr12 cmr17
- cmbx5 cmbx6 cmbx7 cmbx8 cmbx9 cmbx10 cmbx12
- cmmi5 cmmi6 cmmi7 cmmi8 cmmi9 cmmi10 cmmi12
- cmsy5 cmsy6 cmsy7 cmsy8 cmsy9 cmsy10
- lasy5 lasy6 lasy7 lasy8 lasy9 lasy10
- emsy5 emsy6 emsy7 emsy8 emsy9 emsy10
- cmti7 cmti8 cmti9 cmti10 cmti12
- cmss8 cmss9 cmss10 cmss12 cmss17
- cmssi8 cmssi9 cmssi10 cmssi12 cmssi17
- cmsl8 cmsl9 cmsl10 cmsl12
- cmtt8 cmtt9 cmtt10 (cmtt12)
- cmtex8 cmtex9 cmtex10
- logo8 logo9 logo10
- cmex9 cmex10
-
- cmcsc10 cmtcsc10 lasyb10 logobf10 logosl10 cmdunh10 cmssq8 cmssqi8
- cmssbx10 cmssdc10 cmbxti10 cmbxsl10 cmitt10 cmsltt10 cmvtt10 cmmib10
- cmbsy10 cmb10 cmfi10 cmff10 cmu10 cmfib8 cminch lcmss8 lcmssb8
- lcmssi8 line10 linew10 lcircle1 (=lcircle10) lcirclew (=lcirclew10)
-
- In each `magnification' scaled 800 and scaled 900 one has the font:
-
- cmcsc10
-
- Big fonts for SliTeX are packaged in a separate font library file
- (lj_sli.fli, for example):
-
- "\magstep6" (scaled 2986)
- "\magstep7" (scaled 3583)
- "\magstep8" (scaled 4300)
-
- lcmss8 lcmssi8 lcmssb8 cmmi8 cmsy8 cmtt8 lasy8
-
- "\magstep9" (scaled 5160)
-
- lcmss8
-
- The font cmtt12 is missing for some devices in some magnifications (this
- is taken into account in lfonts.tex).
-
- You don't need separate fonts for the screen previewers, as you can use
- the printer fonts.
-
-
- ------------------------------------------------------------------------------
- License
- ------------------------------------------------------------------------------
-
- emTeX may only be distributed in UNCHANGED and COMPLETE form (all zip
- files, readme.eng and readme.ger!), and only when this is done WITHOUT
- CHARGE. If you want to distribute only parts of emTeX or if you want
- to charge a small fee for handling etc., you have to contact the author.
-
- Please observe the license conditions for pkzip/pkunzip
- (see manual.doc in pkz102.exe)!
-
- Please observe the directions in \emtex\texinput\ghyphen.min and
- \emtex\texinput\ghyphen.max!
-
- Please observe the directions in \emtex\doc\makeindx.cpy (see also
- \emtex\doc\english\texware.doc and \emtex\doc\german\texware.doc)!
-
- TeXcad is Shareware. Please observe the directions in
- \emtex\doc\english\tcman.dvi!
-
- No guarantee is made as to the proper functioning of the programs.
- No liability will be admitted for damage resulting from using the
- programs.
-
- Instead of a list: All the trademarks used in this document and all
- the other emTeX documents are registered to whoever it is that owns them.
-
-
- ------------------------------------------------------------------------------
- How do I get emTeX?
- ------------------------------------------------------------------------------
-
- - You can get emTeX at some University computing centers.
-
- - Ask your friends, etc.
-
- - Ask your local TeX users group.
-
- - Anonymous ftp:
-
- ftp.uni-stuttgart.de [129.69.1.12] soft/tex/machines/pc/emtex
- ymir.claremont.edu [134.173.4.23] [anonymous.tex.ibm_pc.emtex]
- archive.cs.ruu.nl [131.211.80.5] TEX/emtex
- utsun.s.u-tokyo.ac.jp [133.11.11.11] TeX/emtex
- ponder.csci.unt.edu [129.120.3.16] pub/TeX/EmTeX
-
- - Mail server:
-
- mail-server@cs.ruu.nl
- mail-server@rusinfo.rus.uni-stuttgart
- texserver@uk.ac.tex (UK)
- texserver@tex.ac.uk (outside UK)
-
- - Ask the one from whom you got this text. As this text is distributed
- by the author only with the complete emTeX, you should be able to
- trace back this text to a complete emTeX.
-
- - If there is no other way to get emTeX (which is impossible, as proved
- above), you can try to send formatted diskettes in sufficient number
- (5.25 inch, 1200 KB, high density or 3.5 inch, 1440 KB, high density;
- see above; include a spare diskette), return postage, and a suitable
- self-addressed package, to the author (see below). Also indicate the
- fonts desired (i.e. printer type and resolution). You can save the
- author from unpleasant work by using MFjob (which comes with emTeX)
- for generating fonts.
-
- Shipping at your risk. You also run the risk of having your address
- given to (a few) other people in your vicinity who want a copy of emTeX.
-
-
- ------------------------------------------------------------------------------
- The author
- ------------------------------------------------------------------------------
-
- Address:
-
- Eberhard Mattes
- Teckstrasse 81 (Teckstra\ss e)
- D-7141 Moeglingen (M\"oglingen)
- Federal Republic of Germany
-
- Questions only by mail! No telephone calls please!
- Please inclose a self-addressed return package with postage if
- you expect a response. Read help.eng first!
-
- Electronic mail (subject to sudden change):
-
- Internet: mattes@azu.informatik.uni-stuttgart.de
-
- If you want support by telephone, obtain a commercial TeX package.
-
- Frequently asked questions (and answers) will be found in help.eng and
- help.ger.
-
-
- ------------------------------------------------------------------------------
- Reporting bugs
- ------------------------------------------------------------------------------
-
- If you find a bug please tell the author so that it can be corrected. Please
- send the following information which is needed for the task:
-
- - machine type (XT, AT, 386 &c.), CPU, BIOS, video card, printer
- (manufacturer and model), operating system and version number
- (note: SYSLEVEL command with OS/2). For instance:
- AT compatible, 286, Award, Paradise VGA, DeskJet+, IBM PC-DOS 3.3 .
-
- - the text of the autoexec.bat and config.sys in use when the error
- occurred: if possible, with an explanation of the programs called and
- drivers installed that are not part of the operating system.
-
- - emTeX version (date of issue, see head of readme.eng)
-
- - enough information for the error to be reproduced, if possible a disk
- (5.25" or 3.5") containing the appropriate files (see also dvidrv.doc).
-
- - the dvidrv log file, if the error is in a driver
-
- - the part of the printed output which shows the error, if the error is in
- a printer driver.
-
- Please inclose a self-addressed return package with postage if
- you expect a response.
-
-
- ------------------------------------------------------------------------------
- Changes from earlier versions (with regard to the installation)
- ------------------------------------------------------------------------------
-
- 16-Oct-1989
- -----------
-
- MFWARE: The .exe files were moved from the directory \emtex\mfjob
- to the directory \emtex. Please delete old .exe files in
- \emtex\mfjob. For further changes see mfjob.doc.
-
-
- 06-Nov-1989
- -----------
-
- TEX: tex286.exe new.
- ehyphen.tex renamed to ahyphen.tex.
- dhyphen.tex renamed to ghyphen.tex.
- In case you use your own .fmt files, these should be made
- over.
-
- DVIDRV: `view' renamed to `v'.
- Names of the environment variables changed (see *.cnf).
- Batch and configuration files changed.
-
- DVIDRVMA: dvitrans.* removed, graphic files now supplied.
-
- BIBTEX: ieeetr.bst and sample.bst removed (please delete).
-
- MF: Following files removed (delete in \emtex\mfinput!):
-
- grdov.mf, grdov5.mf, gresp.mf, gresp5.mf, gray.mf, black.mf,
- lgresp.mf, sldov6.mf, slaps4.mf, imhalf.mf, aphalf.mf,
- ddhalf.mf, blaps.mf, bldov.mf, blesp.mf, oneone.mf.
-
- mf286.exe new.
-
- In case you use your own .bas files, these have to be redone,
- since mf.poo has been changed.
-
- MISC_MF: The file \emtex\mfinput\trap.mf was removed (delete!).
-
- TEXWARE: Contains now the former package TEX_UTIL.
-
- MISC_TEX: Does not exist anymore.
-
-
- 12-Feb-1990
- -----------
-
- BTEX New.
- BLATEX New.
- MAKEINDX New.
- DVIDOT New (preliminary version, will be delivered later with
- DVIDRV).
-
- Fonts:
- Additional fonts (needed for LaTeX):
-
- cmcsc10 scaled 800; cmcsc10 scaled 900.
-
- fli files renamed (hp_* -> lj_*). IF YOU ALREADY ARE USING
-
- hp_*.fli-files: PLEASE RENAME.
-
- Fonts renamed:
-
- grayhp -> graylj, blackhp -> blacklj and slanthp -> slantlj
-
- Fonts renamed:
-
- grayeps -> grayfx, blackeps -> blackfx and slanteps -> slantfx
-
- Additional Fonts in lj_1500:
-
- graylj, blacklj, slantlj
-
- Additional Fonts in fx_1200:
-
- grayfx, blackfx, slantfx
-
-
- 21-Feb-1990
- -----------
-
- From now on all changes are documented in CHANGES.DOC.
- Changes that concern installation are also entered here.
-
- BMF New.
-
-
- 08-Aug-1990
- -----------
-
- GTEX: New. (Taken out of the TEX package.)
- GLATEX: New. (Taken out of the LATEX package.)
- GBTEX: New. (Taken out of the BTEX package.)
- GBLATEX: New. (Taken out of the BLATEX package.)
-
- TEXCAD New.
-
- DVIDOT: Now to be found in the DVIDRV package. There is no longer an
- \emtex\doc\dvidot.doc, please delete it.
-
- DVIDRV: The old dot matrix drivers have been replaced by dvidot:
- dvifx, dviitoh, dviaiw, dvip6l, dvip6m, dvip6h have been
- removed.
-
- DVIDRV: .cnf- .bat- and .cmd files changed. If you have made your own
- alterations to these file, you should alter the new files
- appropriately.
-
- The `manual' font has been renamed `manfnt' (this is the standard name).
- You should delete \emtex\tfm\manual.tfm and \emtex\mfinput\manual.mf.
-
- ghyphen.min and ghyphen.max have replaced ghyphen.tex (which was out of
- date). Please delete ghyphen.tex.
-
- ahyphen.tex has again been changed to hyphen.tex (it will stay like that
- now). Please delete ahyphen.tex.
-
- The program remove can be used to remove the files making up a package
- from the installed system.
-
- bglatex.cmd and bglatex.bat have been renamed gblatex.cmd and gblatex.bat
- respecitvely. Please delete bglatex.cmd and bglatex.bat.
-
- MFWARE: mfjob1.exe and mfjob2.exe have been renamed mfjob1.ovl and
- mfjob2.ovl; please delete mfjob1.exe and mfjob2.exe.
-
- GLATEX: no longer contains modified sty files, as the LATEX package now
- contains ILaTeX. Please delete all files from the
- \emtex\texinput\german directory and change the environment
- variable TEXINPUT appropriately.
-
- LATEX: latex.dif no longer there; doc files are now in the LATEXDOC
- package.
-
- LATEXDOC: New.
-
- Documentation in English, as far as is available, will be found in the \
- emtex\doc\english directory. German documentation is to be found in
- \emtex\doc\german. If a document is available in only one language, it
- will be found in \emtex\doc.
-
- Frequently asked questions (and answers) will be found in help.eng and
- help.ger.
-
- Now both German and English versions of changes.doc: changes.ger and
- changes.eng. Changes amde in earlier versions are detailed in changes.pre.
-
- delete: ***ATTENTION***: meaning of -n option changed!
-
-
- 20-Aug-1990
- -----------
-
- cmman.tfm and manfnt.tfm moved from MISC_MF package to TEX package.
-
-
- 25-Sep-1990
- -----------
-
- The file format of font library files has changed. If you own font library
- files of an old emTeX distribution, the fli files must be converted to the
- new format. First, copy the complete new DVIDRV package onto your disk.
- Then, change to the directory containing the fli files and start the batch
- file newfonts, giving the path name of the file `fontlist' as argument
- (\emtex\fontlist with the correct drive). Example (fonts in c:\texfonts,
- emTeX on disk D):
-
- c:
- cd \texfonts
- newfonts d:\emtex\fontlist
-
- 1200 KB of disk space must be available.
-
- The fonts circle10 and circlew10 have been renamed lcircle10 (lcircle1)
- and lcirclew10 (lcirclew). Please delete the files
-
- \emtex\tfm\circle10.tfm
- \emtex\tfm\circlew1.tfm
-
- These fonts were also renamed in the font libarary files. If you're
- using old dvi files with new fonts, you have to use the font substitution
- file newfonts.sub (/ps=c:\emtex\newfonts). If you're using new dvi files
- with old fonts, you have to use the font substitution file oldfonts.sub
- (/ps=c:\emtex\oldfonts).
-
- If you have fonts in directories named like \emtex\pixel.fx\pxl$s,
- you should rename these directories \emtex\pixel.fx\$rdpi, replacing
- $r with $s/5 (rounded). Example:
-
- \emtex\pixel.lj\pxl1800 --> \emtex\pixel.lj\360dpi
-
-
- 02-Jul-1991
- -----------
-
- DVIDRVMA: dvidrv.dvi (German version) moved from \emtex\doc to
- \emtex\doc\german. Please delete \emtex\doc\dvidrv.dvi.
-
-
- 06-Oct-1991
- -----------
-
- TEX: emtex.dvi (German version) moved from \emtex\doc to
- \emtex\doc\german. Please delete \emtex\doc\emtex.dvi.
-
-
- 10-Jun-1992
- -----------
-
- New LaTeX version. The following ZIP files have been changed:
-
- BLATEX.ZIP BTEX2.ZIP GBLATEX.ZIP GBTEX.ZIP
- GLATEX.ZIP GTEX.ZIP LATEX1.ZIP LATEX2.ZIP
- LATEXDOC.ZIP MAKEINDX.ZIP TEX2.ZIP
-
-
- 23-Jun-1992
- -----------
-
- Bugs fixed, new MakeIndex version. The following ZIP files have been
- changed:
-
- BLATEX.ZIP GBLATEX.ZIP GLATEX.ZIP
- LATEX2.ZIP MAKEINDX.ZIP
-
- Known bug: \righthyphenmin is not set to 2 when generating plaing.fmt.
-
- -------- End of README.ENG -------------
-